Universal Logging System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== send2uls =====

send2uls.exe is used to transfer ULS value files to the ULS-server. On success,
it will remove the ULS value files.

Usage:
  send2uls.exe [-?] [-l] [-h <testhost>] [-u <ulsserver>] [-U <ulsserver2>] [-S] [-P <proxy>] [-d <dir>] [-e <line>] [<files>]

{|
! parameter
! description
|-
| -?
| Shows the usage summary. Any unrecognized parameter will generate this output.
|-
| -l
| Outputs some verbose information during program execution.
|-
| -h <testhost>
| Checks whether the ULS-server accepts values from the <testhost> and its currently effective ip address. It returns an "OK" on success, "NOSRV" on failure.
|-
| -u <ulsserver> 
| Specifies the destination ULS-server, <ulsserver> := ip:port, e.g. 10.2.3.4:11975
|-
| -U <ulsserver2> 
| Specifies the second destination ULS-server, <ulsserver2> := ip:port, e.g. 10.2.3.4:11975. 
 The transfer is only done if the transfer to the <ulsserver> was successful.
|-
| -S
| Use HTTPS in when transferring data to the ULS-server. 
 the script accepts the self-signed certificate offered by the ULS-server as is (no check and no two-way authentication).
 Man-in-the-middle attacks are possible.
|-
| -P <proxy>
| Use the proxy, <proxy> := ip:port, e.g. 10.1.1.111:3333
|-
| -e <line>
| Transfer a one-liner to the ULS-server, no file, no directory. <line> must confirm to lines described in [[uls:agents:value_file_format]].
|-
| -d <dir>
| Transfer all files in directory <dir> to the ULS-server <ulsserver> and optionally to ULS-server <ulsserver2>.
 Remove the <dir> only if the transfer ((only the transfer, not the insertion into the database)) to <ulsserver> was successful.
 Nevermind if the transfer to <ulsserver2> was successful.
|-
| <files>
| Transfer all given <files> to the ULS-server <ulsserver> and optionally to ULS-server <ulsserver2>.
 Remove the <files> only if the transfer ((only the transfer, not the insertion into the database)) to <ulsserver> was successful.
 Nevermind if the transfer to <ulsserver2> was successful.
|}
Universal Logging System

User Tools

Site Tools

Page Tools
