Universal Logging System

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
===== Administrative Settings =====

==== Defining domains and sources ====

Test specific domains must be defined.

{|
! domain
! description
|- 
| Woodlark
| create this as new domain
|-
| ULS
| use this existing domain
|}

<!-- wood lark = Heide Lerche (Lullula arborea) -->
<!-- blackbird = Amsel (Turdus merula) -->
<!-- chickadee = amerikanische Meise (Parus (Gattung)) --> 

Test specific sources (servers) must be defined.

:!: Add the sources, all sources must be defined with the ip-address of the ULS stage server, all sources are mocked. Use the ip-address of **your** server!

{|
! serverid
! servername
! domain
! ip-address
! secondary ip-address
! accept ip-addresses
|-
| ulstest1
| testsrv11
| ULS
| 10.1.2.3
|
|
|-
| ulstest2
| testsrv12
| ULS
|
| 10.1.2.3
|
|-
| ulstest3
| testsrv21
| Woodlark
| 
|
| 10.1.2.3
|-
| ulstest4
| testsrv22
| Woodlark
|
|
| 10.1.2.3/32 ((only exactly this ip-address))
|}

Check that all domains and sources have been created correctly.

----
==== Groups and Users ====

Define test specific groups.
Be sure to show all domains, even those freshly created by clicking {{:uls:testsuite:version_180:all_domains.png?nolink|}}.

{|
! group
! rights on domain "ULS"
! rights on domain "Woodlark"
|- 
| Hotliners
| none
| read-only
|-
| Systemaniacs
| read-only
| full rights
|-
| Databasics
| full rights
| read-only
|-
| AllRounder
| full rights
| full rights
|}

Use //show groups// to check the result.

Define test specific users.
Use the username as password.
Do not assign any domains or domain privileges.

{|
! user
! group "Hotliners"
! group "Systemaniacs"
! group "Databasics"
! group "AllRounder"
! admin
! password never expires
|-
| AmieAction
| 
| 
| style="text-align:center" | x
| 
| 
| style="text-align:center" | x
|-
| HeyJoe
| style="text-align:center" | x
| 
| 
| 
| 
| style="text-align:center" | x
|-
| SystematicGuy
| 
| style="text-align:center" | x
| 
| 
| 
| style="text-align:center" | x
|-
| TheSpyder
| style="text-align:center" | x
| style="text-align:center" | x
| style="text-align:center" | x
| style="text-align:center" | x
| style="text-align:center" | x
| style="text-align:center" | x
|}

Use //show user// to show the list of all users and verify all users for correct group membership.
Verify especially that "TheSpyder" has full rights on both domains and can change to the //admin menu//.

Every time you login as a different user, go to //administration -> options// and enter:

{|
|+ set options for TheSpyder
! show username
| [x]
|}

The username should appear in the upper frame below the logos after changing to the //main menu//.

----

==== Notification Destinations ====

As user "TheSpyder" use 
//notification -> edit notification destinations -> Mail//
to add an e-mail notification destination. 
Use a correct e-mail address instead of "your@emailaddress".

{|
! type
! name
! address
|- 
| Mail
| ULS Test
| your@emailaddress
|}

Assign the new defined notification destination to group "Hotliners".
Try the //test// link to send a test e-mail to your@emailaddress.


Use //groups -> group ticket targets// to define ULS ticket targets, 
which are destination groups in the ULS internal ticket tracking (UTT) system.

{|
! group
! name
! escalation ((is currently not checked))
! remark
|- 
| Databasics
| UTT Databasics
| 
| The ticket target for "Databasics" monitoring.
|-
| Systemaniacs
| UTT Systemaniacs
|
| The ticket target for "Systemaniacs" monitoring.
|}

----

==== Access Codes ====

As user "TheSpyder" use the "admin menu" and select //main menu -> edit access//
and change the description of the access codes:

{|
! name
! retention time
! description
|-
| all
| 14
| general
|-
| adm
| 90
| admin
|-
| sec
| 366
| security
|-
| ulsadmlog
| 90
| uls admin actions
|}

-----

==== Settings for Auditing ====

As user "TheSpyder" use the "admin menu" and select //main menu -> system -> edit system variables//
and verify or change the "access-code for admin-auditing" to "ulsadmlog":

{|
|+ settings for auditing
! servername for admin-auditing
| testsrv11
|-
! access-code for admin-auditing	
| ulsadmlog
|-
! storetime in days for user changeprotocol
| 360
|}

-----
==== Special Units ====

As user "TheSpyder" use the "admin menu" and select //main menu -> system -> edit units//
and verify or define the unit "boolean" and "{E} :car".

{|
! name      
! si-unit      
! si-factor   
! si-offset   
! printflag   
! plotstyle
|-
| boolean
| boolean
| 1
| 0
| [x]
| impulses lc rgb 'blue' lw 3
|-
| {E} :car
| {E} :car
| 0
| 0
| [ ]
| custom
|-
| [] ((open and closed bracket))
| [] ((open and closed bracket))
| 1
| 0 
| [ ]
| points pt 3 ps 1 ((unit is present, change only the plotstyle))
|}

If that unit does not exist yet and you are creating it now, 
you leave "si-unit" blank and change it to itself by using 
the appropriate drop-down box after the 
unit has been initially saved.
Universal Logging System

User Tools

Site Tools

Page Tools
