User Tools
Sidebar
uls:testsuite:version_180:admin_settings
This is an old revision of the document!
Table of Contents
Administrative Settings
Defining domains and sources
Test specific domains must be defined.
| domain | description |
|---|---|
| Woodlark | create this as new domain |
| ULS | use this existing domain |
Test specific sources (servers) must be defined.
Add the sources, all sources must be defined with the ip-address of the ULS stage server, all sources are mocked. Use the ip-address of your server!
| serverid | servername | domain | ip-address | secondary ip-address | accept ip-addresses |
|---|---|---|---|---|---|
| ulstest1 | testsrv11 | ULS | 10.1.2.3 | ||
| ulstest2 | testsrv12 | ULS | 10.1.2.3 | ||
| ulstest3 | testsrv21 | Woodlark |
Check that all domains and sources have been created correctly. |
Groups and Users
Define test specific groups.
Be sure to show all domains, even those freshly created by clicking 
.
| group | rights on domain “ULS” | rights on domain “Woodlark” |
|---|---|---|
| Hotliners | none | read-only |
| Systemaniacs | read-only | full rights |
| Databasics | full rights | read-only |
| AllRounder | full rights | full rights |
Use show groups to check the result.
Define test specific users. Use the username as password. Do not assign any domains or domain privileges.
| user | group “Hotliners” | group “Systemaniacs” | group “Databasics” | group “AllRounder” | admin | password never expires | |||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AmieAction |
Use show user to show the list of all users and verify all users for correct group membership. Verify especially that “TheSpyder” has full rights on both domains. |
Notification Destinations
Use notification → edit notification destinations → Mail to add an e-mail notification destination. Use a correct e-mail address instead of “your@emailaddress”.
| type | name | address |
|---|---|---|
| ULS Test | your@emailaddress |
Assign the new defined notification destination to group “Hotliners”. Try the test link to send a test e-mail to your@emailaddress.
Use groups → group ticket targets to define ULS ticket targets, which are destination groups in the ULS internal ticket tracking (UTT) system.
| group | name | escalation 1) | remark |
|---|---|---|---|
| Databasics | UTT Databasics |
|
Access Codes
As user “TheSpyder” use the “admin menu” and select main menu → edit access and change the description of the access codes:
| name | retention time | description |
|---|---|---|
|
all |
Special Units
As user “TheSpyder” use the “admin menu” and select main menu → system → edit units and verify or define the unit “boolean” and “{E} :car”.
| name | si-unit | si-factor | si-offset | printflag | plotstyle |
|---|---|---|---|---|---|
|
boolean If that unit does not exist yet and you are creating it now, you leave “si-unit” blank and change it to itself by using the appropriate drop-down box after the unit has been initially saved. 1)
is currently not checked uls/testsuite/version_180/admin_settings.1391615860.txt.gz · Last modified: 2014-02-05 16:57 by uls
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
 
|